MTO934CHG Smart Charger for 934NI-CAD Batteries

This is an MTO Battery smart charger that is compatible with the 12V Teledyne ISCO 934NI-CAD battery. This assembly is put together at our facility in PA and is not an OEM original charger. Our charger will automatically shut off when it is done charging and will not continue to trickle charge for your battery indefinitely which detracts from overall battery life. This charger operates on 120VAC. Compatible with NiCad and NiMH batteries ONLY. DO NOT attempt to charge Pb, Li-ion, LiFePO4, Li-Po, or any other battery chemistry. 

Charge times:

~ 4-5hr for an OEM 4.0Ah Teledyne battery

~ 5-6hr for a 5.0Ah MTO Battery

~10-12hr for a 9.0Ah MTO Battery

Charging Indicators:

Green flashing: No battery attached (Or battery is too discharged to be charged)

Solid Red: Normal Charging

Solid Green: Battery Charging Completed

Red Flashing: Bad battery / Battery is hot / Voltage is below 6V

DO NOT short circuit this charger.

DO NOT insert anything into the charging connectors except for the battery connector.

This charger is designed for use in dry environments only. Exposure to water may cause damage. 

MTO Battery is not affiliated with nor endorsed by Teledyne®.